Double Glazed Window Repair
It's worth looking over the warranty that comes with double-glazed windows in the majority of cases. In general, it covers issues with the hardware of the window including hinges and locking mechanisms in the first 10 years.
A leak in the seal is usually the reason for mist appearing between your glass windows. This should be fixed immediately to avoid mould or damp forming in your home.
Condensation Between the Windows
If you notice condensation forming between your windows, this could be an indication that the seal holding in the gas insulating the windows has failed. This can be a serious problem that should be addressed as soon as possible, especially in winter when humidity is at its highest. It could also cause damage to the sills, sealant and mould.
Double-glazed windows shouldn't have condensation between the panes. However, it's not uncommon for high humidity or an extremely cold snap to trigger this issue. This issue is usually resolved without the need to replace an entire window. A professional can drill tiny holes in the window and spray special cleaning solution inside. The water is then drained from the window and an anti-fogger is installed to stop the build-up of moisture in the future.
Condensation in the windows could also occur due to air leakage or other factors outside the window. If this is the scenario, it's likely to take longer for moisture to gather inside the window, since the air has to be warm enough for the water molecules to evaporate. In these cases it is best to replace double-glazed windows rather than trying to repair the sealed units.
A double-glazed glass window is comprised of two or more pieces of tempered insulated glass, which are joined by a framework made of metal. The space between the windows is filled with an insulating gas, such as Krypton or argon and then sealed. The seal prevents the gas that is insulating from escape and also prevents air and moisture from entering through the gap.
As the windows age, the seals will weaken and allow moisture to leak into the gap between the glass panes. Repair My Windows And Doors is crucial to recognize when seals are beginning to leak, as it means that the double glazing is no longer functioning as well as it did in the past. This can result in poor energy efficiency, a rise in heating bills, damage to the properties and the risk of condensation between the windows.
Mist
If you notice condensation on the outside of your windows, this is totally normal - it means that your double glazing is functioning properly and retaining the heat in your home. The condensation develops because the outside air is more warm than the glass and it reaches its dew point before the window. Double glazing of top quality is an excellent method to accomplish this.
If the condensation is located on the inside of your window then this could be an indication of a ventilation issue in your home. The excess moisture can't be absorbed and end in the carpets, windows, furniture, and other parts of your home. This can be prevented by having it inspected by an expert and ensuring that there is sufficient fresh air in your home.
Another reason for mist on double-glazed windows is because the seal between two glass panes has been broken. This can be due to wear and tear or chemical cleaning solutions being used. If this occurs the best solution is to have the windows repaired as soon as possible.
Repairing your windows professionally will ensure they remain fog-free free of condensation, and free of misting. It's also cheaper than replacing them entirely and will save you money on your energy costs.
A FENSA registered window installer can provide you with a quote for the repair or replacement of your double glazed windows. Upgrade your windows to A-rated energy-efficient ones in the event that they are extremely old.
It is a very good idea to keep copies of any warranties or agreements with your window fitting company. This can be extremely helpful should any issues with the windows occur in the future, and you can then contact your installers to resolve the issue. This is a better choice than ignoring the problem and causing further problems in your home.
The difficulty of opening or closing the door
Double-glazed windows are difficult to open and close it isn't just annoying but it could also result in higher energy bills because of heat loss and draughts. It could also be a security risk, especially when the locks aren't functioning correctly. It is recommended to fix double-glazed windows and doors in the earliest time possible.
If you are unable to open your window and have tried the simplest solution such as using a screwdriver to prise it open or rubbing the frame with a tough object, the issue may be more serious. It could be that the window is sagging in its frame and needs to be reset or it could be that there is a gap between the glass panes and frames. In any case, it is recommended to contact an experienced double glazing repair expert to make sure that the right repairs are done and to prevent any further problems.
It is not common for UPVC window handles and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. This is caused by an accumulation of grease or dirt inside the handle and can often be solved by cleaning it using a uPVC cleaner. If this doesn't work, try tapping the uPVC using the screwdriver. Be careful not to damage either the handle or window handle mechanism.
If this does not resolve the problem then the window might need to be replaced as it is likely that the hinges are no longer in the correct position, or the locking mechanisms are damaged. In this situation you should speak to a UPVC window specialist.
David The Window Wizard is a specialist in double-glazed window and door repairs, including repairing double-glazed windows that have been blocked or locked. He has a wealth of experience converting discontinued window mechanisms to modern ones. This can often save you the expense of replacing the whole window. For more information or to book a free quote call or email today.
Warping
Double-glazed windows are an excellent way to save energy in your home. They are made up of two panes that contain a spacer or dense gas between them. This creates a seal which keeps cold air out and warm inside. However, over time, windows can be damaged or broken and require repair. Fortunately, the majority of these repairs are easy and can be done without the cost of replacing the entire window.
A common issue that double-glazed windows face is warping. The windows begin to bend, bow or twist, which may affect the structural integrity of the window as well as its insulating capabilities. The best way to avoid this issue is to make sure that your double glazed windows are properly installed and maintained regularly.
Contact a specialist as soon as you realize that your double-glazed windows are sagging. This will help keep the issue from getting worse. They can inspect your windows and identify the reason for the warping. They will then employ specific tools to correct the issue and ensure that your windows are sealed.
Water vapour is a cause of this issue because it can build up between the windows over time. This can be caused by various factors, such as the weather as well as humidity levels and temperature changes. To resolve this issue the expert will drill a small hole to release moisture. The specialist will apply a cleaner on the glass to clean it, then apply sealant.
In the alternative, if your windows aren't being closed or opened, this could be a sign of a break in the mechanism or hinges. Before calling an expert to resolve the problem, it is worth lubricating these parts. This can usually fix the issue and reduce the need for replacements. If your windows are dated or do not provide the insulation you desire it might be better to replace them.